Gasket Kit, RG 500

Starting at: 52.50EUR + VAT

Attention! Some of the pieces making up the gasket kit are temporarily out of stock; the missing pieces are already being reordered and delivery is expected soon.

The missing pieces are these:
- copper washer for internal screw of the water pump

In the meantime you can still purchase incomplete kits at a reduced price. Below is the list of pieces currently available.

main kit:

1    Base cylinder gasket, front
1    Base cylinder gasket, rear

1    Clutch cover gasket
1    Oil pan gasket
4    Rotary valve seat gasket, 0.5 mm
4    Rotary valve seat gasket, 0.1 mm
1    Ignition stator support gasket
1    Oil vent cover gasket
1    Neutral switch gasket
4    Exhaust valve gasket
4    Inox exhaust gasket
8    Crankcase bolt copper gasket
16    Head nut copper gasket
1    Oil level plug aluminum gasket
1    H2O discharge plug aluminum gasket

2   Metal head gaskets

O-Ring options:

1    Inner sprocket cover O-Ring
1    Inner water circuit O-Ring
1    Oil load cap O-Ring
8    Cylinder head O-Ring
1    Thermostat cover O-Ring
1    Pick-up O-Ring, VITON or NBR
1    Water pump cover O-Ring
1    Premix oil pump O-Ring
4    Rotary valve cover O-Ring, VITON or NBR
8    Carburetor flange O-Ring, VITON or NBR
1    Sprocket spacer O-Ring

available in all combinations provided (see below)

Carburettor Bowl Gaskets: available


______________________________

The best of the aftermarket gasket kits for the RG 500 engine got even better! We added pieces you won't find in any competitors' kits and improved the pieces already included. 80 pieces total and quality even better than original at about half the price! Can't even compare with the usual noname brand aftermarket kits made by people who have never seen an RG 500!

For the kit details click here .

 

You can customize your kit according your needs by selecting the following options:

  • head gaskets: none or genuine Suzuki;

  • O-Ring: none, complete set all NBR, complete set with 13 critical pieces in Viton ("antiseize kit" sold also stand-alone);

  • valve diameter: either standard valve or 116 mm valve;

  • you can choose the kind of valve seat gasket but PAY ATTENTION! We strongly suggest you to choose our improved gaskets, the original ones get stuck and will create lots of trouble next time you service the engine;

  • for the 0.3 mm base cylinder gaskets click here: front , rear and add to the cart.


  • Model: KITGORG503
  • 7 Units in Stock
  • Manufactured by: Maranello Engineering

Please Choose:

ORing type :








Valve seat gaskets :





Head gaskets :





Carburettor Bowl Gaskets






This product was added to our catalog on Tuesday 06 December, 2011.

Copyright © 2008-2024 Maranello Engineering Srl - VAT # IT 03185930363 - Powered by Zen Cart