KITGSVRG5A
Mini kit, seat valve gaskets for tuning the valve clearance of the RG 500. It includes 12 pieces in 3 different thicknesses (4 pieces for each...
28.82EUR
Add:
KITORG502V
This kit replaces all ORings of the RG500 engine that are exposed to contact with gasoline, with ORings made in VITON (FKM, an elastometer that is...
34.72EUR
... more info
GBCRG5F030
Close replica of the original base cylinder gasket of the RG 500 Gamma engine front cylinder bank (Suzuki part number 1124120A03, 11241-20A03-H17,...
7.39EUR
Add:
GBCRG5F050
Close replica of the original base cylinder gasket of the RG 500 Gamma engine front cylinder bank (Suzuki part number 1124120A03, 11241-20A03-H17,...
6.96EUR
Add:
GBCRG5F080
If you need the front base cylinder gasket gasket of the RG 500 Gamma engine available in 0.80 mm thickness, we offer you a 0.50 mm thick gasket + a...
12.62EUR
Add:
GBCRG5R030
Close replica of the original base cylinder gasket of the RG 500 Gamma engine rear cylinder bank (Suzuki part number 1124220A00, 11242-20A00-H17,...
7.39EUR
Add:
GBCRG5R050
Close replica of the original base cylinder gasket of the RG 500 Gamma engine rear cylinder bank (Suzuki part number 1124220A00, 11242-20A00-H17,...
6.96EUR
Add:
GBCRG5R080
If you need the rear base cylinder gasket gasket of the RG 500 Gamma engine available in 0.80 mm thickness, we offer you a 0.50 mm thick gasket + a...
12.62EUR
Add:
OR041022V
This is a better replacement for the O-Ring of the RG 500 . Dimensions and colour are the same as stock Suzuki 09280-33005, but it's made in...
1.99EUR
Add:
KITSRG5125VA
Servicing kit for the standard RG500 crankshaft, made of 4 high speed Viton seals and 4 avional spacers (please see the descriptions of the...
50.92EUR
Add:
SETSRG502
Set made of 5 oil seals for the RG 500 engine: driven shaft output oil seal (front sprocket) water pump oil seal starter oil seal (kickstarter lever)...
13.37EUR
Add:
KITORG503
Kit containing all the ORings of the RG 500 engine (28 pieces) now available in two versions: base version (economy) where all pieces are made in NBR...
20.20EUR
... more info
OR137018
Special O-Ring to be used with our CNC billet rotary valve covers. It can also be used with stock covers, but if and only if the thickness of the...
2.40EUR
Add:
OR137018V
Special O-Ring to be used with our CNC billet rotary valve covers, VITON version. VITON rings are much more resistant to gasoline than plain NBR...
8.14EUR
Add:
GSVRG5010
Valve seat gasket of the RG 500 Gamma engine, 0.10 mm thickness. This gasket design is similar to the original gasket (Suzuki part number 1247120A03)...
1.72EUR
Add:
GSVRG5020
Valve seat gasket of the RG 500 Gamma engine, 0.20 mm thickness. This gasket design is similar to the original gasket (Suzuki part number 1247120A03)...
2.52EUR
Add:
GSVRG5040
Valve seat gasket of the RG 500 Gamma engine, 0.40 mm thickness. This gasket design is similar to the original gasket (Suzuki part number 1247120A03)...
3.33EUR
Add:
GSVRG5050
Valve seat gasket of the RG 500 Gamma engine, 0.50 mm thickness. This gasket design is similar to the original gasket (Suzuki part number 1247120A03)...
2.83EUR
Add:
OR138022V
This is a better replacement for the O-Ring of the RG 500 outer rotary valve cover. Dimensions and colour are the same as stock Suzuki part number...
4.90EUR
Add:
KITGORG503
Attention! Some of the pieces making up the gasket kit are temporarily out of stock; the missing pieces are already being reordered and delivery is...
52.50EUR
... more info
CBGRG5
Carburetor bowl gasket for the original 28 mm Mikuni carburettor of the Suzuki RG 500 and RG 400. This object is NOT the genuine part number...
6.00EUR
Add:
