Languages
Categories
- Complete SGM Engines
- SGM Engines Spares
- SGM Services
- Complete VX Chassises
- VX Chassises Spares
- LUX Radiators
- Other Products
- All Products
- - By Category
- - Chassis Parts
- - Clothing
- - Transmission
- - Clutch
- - Float Carburettors
- - Axles and Accessories
- - Spindles and Accessories
- - 25 mm
- - Wheel Hubs
- - Wheel Rims
- - Sprockets
- - Sprocket Carriers
- - Brakes
- - Brake Carriers
- - Torsion bars and accessories
- - Seats
- - Petrol Tanks
- - Other Chassis Spares
- - Tools
- - Top End
- - Cooling
- - Bearings
- - Intake
- - Shafts
- - Rods
- - Carburators
- - Pumps
- - Lube
- - Case
- - Exhaust
- - Fasteners
- - Gaskets
- - Hardware
- - Ignition
- - Springs
- - Trasmission
- - Sorted List
25 mm
25 mm
VXF.314
21.10EUR 20.05EUR
Save: 5% off
Contact Us
Save: 5% off
BEARING BALL WITH ECCENTRIC D22 10 - 10 L
BEARING BALL WITH ECCENTRIC D22 10 - 10 L
VXF.313
21.10EUR 20.05EUR
Save: 5% off
Contact Us
Save: 5% off
BEARING BALL WITH ECCENTRIC D22 10 - 10 R
BEARING BALL WITH ECCENTRIC D22 10 - 10 R
VXB.102
2.60EUR 2.47EUR
Save: 5% off
Contact Us
Save: 5% off
BUSHING FOR INTERNAL STUB AXLE 25X15MM HOLE 10
BUSHING FOR INTERNAL STUB AXLE 25X15MM HOLE 10
VXB.103
2.55EUR 2.42EUR
Save: 5% off
Contact Us
Save: 5% off
BUSHING FOR STUB AXLE PIN 7X14.5 HOLE 10
BUSHING FOR STUB AXLE PIN 7X14.5 HOLE 10
VXFR.516
55.21EUR 52.45EUR
Save: 5% off
Contact Us
Save: 5% off
FRONT STEEL KZ HUB 40MM WITH BEARINGS FOR STUB AXLE
FRONT STEEL KZ HUB 40MM WITH BEARINGS FOR STUB AXLE
VXFR.518
56.48EUR 53.66EUR
Save: 5% off
Contact Us
Save: 5% off
FRONT STEEL KZ HUB 50MM WITH BEARINGS FOR STUB AXLE
FRONT STEEL KZ HUB 50MM WITH BEARINGS FOR STUB AXLE
VXF.316
9.93EUR 9.43EUR
Save: 5% off
Contact Us
Save: 5% off
King Pin Bolt, M10x90
King Pin Bolt (special M10x90 bolt acting as the spindle pivot)
VXB.105
8.50EUR 8.08EUR
Save: 5% off
Contact Us
Save: 5% off
Stub Axle Spacer 17x25 mm (KZ type)
Spacer, I.D. 17 mm, O.D. 25 mm, used on KZ class chassis (and also on chassis of different classes adopting same system of spindle/carrier/hub used...
